Coatings West supplies tank linings from PPG Protective and Marine Coatings brands Amercoat and Sigma Coatings. Tank linings are carefully selected for service conditions, chemical usage and temperature. Coatings West along with PPG Protective and Marine Coatings technical management will only make a recommendation for coatings when all aspects of the chemistry and service conditions are known. We strongly recommend that you contact Coatings West at 714.777.0300 for a proper recommendation to meet your chemistry and service condition requirements.

Amercoat 133

The solvent free solution for potable water storage and chemical storage

• 100% solids two-component coating
• Excellent chemical, solvent and water immersion resistance
• Can be applied up to 1⁄2" thick on horizontal surfaces
• Complete tank and water pipe lining (potable, salt, waste)
• Repair of tank bottoms, including water tanks, fuel tanks and selected chemical tanks
• Repair of pitted steel surfaces
• Used as a primer for Amercoat 333 edge retentive epoxy coating when a coating system with maximum edge coverage is required.

*For NSF application information, please visit www.ppgamercoat.ppgpmc.com/NSF

Amercoat 333

The edge retentive solution for potable water storage and chemical storage

• 100% solids two-component coating
• Excellent chemical, solvent and water immersion resistance
• Can be applied up to 1⁄2" thick on horizontal surfaces
• High build, edge retentive epoxy coating
• Ballast tanks
• Fuel tanks
• Selected chemical tanks
• Repair of pitted steel structures
• Used as a topcoat over Amercoat 133 when a coating system with maximum edge coverage is required.

*For NSF application information, please visit www.ppgamercoat.ppgpmc.com/NSF

Amerlock 2

Fast return to service and low temperature cure make Amerlock 2 the work horse of the potable water tank lining market.

• Fast dry, dry to touch in 2 hours at 70°F (21°C)
• Recoat in 3 hours at 70°F (21°C)
• Low temperature cure down to 0°F (-18°C)
• Exceptional corrosion protection in industrial and marine corrosive environments

USDA – Incidental food contact
NSF Standard 61* - For use in drinking water.
FDA 21 CFR 175.300 extraction test for direct food contact
*For NSF application information, please visit www.ppgamercoat.ppgpmc.com/NSF

Please call Coatings West at 714.777.0300 for more information and to obtain a PPG Protective and Marine Coatings technical recommendation provided by PPG PMC Technical.