Alkyd Coatings
Corrosion resistance is typical of high quality alkyd primers for steel and will minimize corrosion that may occur in the time between priming and topcoating of the structure.
• Suitable for exterior and interior steel surfaces
• Basic primer for enamel finish coatings and other selected conventional topcoats
Amercoat 5401HSA is a gloss alkyd enamel topcoat used for weathering, mild industrial and marine services. Color and gloss retention during continuous weathering exposure is typical of high quality gloss alkyds.
Amercoat 5405 is typically used for marine exterior areas such as freeboards, decks, houses and
superstructures; interior areas such as engine rooms, passageways and equipment.
Amercoat 5410 Silicone Alkyd Finish Coat
Complies with Military Specification MIL-PRF-24635D
Amercoat 5410 Series silicone alkyd topcoats are designed to protect and enhance the appearance of:
• Marine exterior areas such as freeboards, houses and superstructures; interior areas such as engine rooms, passageways and equipment.
• Power plants
• Industrial structures, tanks, piping and equipment
• Railcars
•Wastewater Treatment plants and equipment
• Institutional maintenance and new construction
Amercoat 5450 alkyd topcoats are designed to protect and enhance the appearance of:
• Marine exterior areas such as freeboards, decks, houses and superstructures; interior areas such as engine rooms, passageways and equipment.
• Power plants
• Industrial structures, tanks, piping and equipment
• Railcars
•Wastewater Treatment plants and equipment
• Bridges
MetalCase is a single component interior/exterior gloss alkyd enamel that is ideal for use on properly
prepared metal substrates. MetalCase is easy to apply, possesses a durable gloss finish and offers full color capability through our Voice of Color® color system.
Fast Dry 2500 is a single component, value-added, fast dry, high gloss, alkyd enamel.
Recommended for spray application to properly prepared metal surfaces and drying to touch at
15 minutes, Fast Dry 2500 is ideal for light industrial use, such as piping, structural steel, and
machinery. Fast Dry 2500 is abrasion resistant, easy to apply, and offers virtually infinite color
capability through our PerformaColor® and 96 line colorant systems.
Sil-Shield is a Silicone Alkyd Gloss Enamel. This high solids, single component product is intended for interior and exterior moderate to high industrial exposures. Possessing a durable high gloss finish and superior fade resistance, Sil-Shield is ideal for use on tanks, piping and structural steel. Available in both White and Neutral bases,